- HOW TO USE CLOUD FOAM CORRECTLY? -
Fill a bucket with water until three-quarters full.
Add 10 to 15 caps of Cloud Foam to the bucket of water, following the dosage instructions recommended on the product packaging.
Stir the mixture in the bucket to create a uniform foam, preferably with a pressurized water hose, as this will make it much easier to activate the foam.
Before starting the cleaning process, the first step is to rinse the entire bodywork to remove any contamination. This will prevent the appearance of micro-scratches.
Dip the wash mitt into the foamy mixture and apply it to the entire body of the vehicle. Make sure to cover all surfaces and pay special attention to the dirtiest areas.
Please note that it is preferable to have two buckets on hand to rinse the glove and not mix the dirty water with the washing water.
Last step before finishing with the glove, you can also clean the rims, but only after you have finished with the bodywork.
Use pressurized water to rinse the shampoo from the bodywork. Make sure to completely remove the product and any dirt residue.
To avoid water spots and dry the car body efficiently, use a drying towel or microfibre cloths. Use gentle, even movements to absorb the water and leave the car body clean and shiny.
Remember to follow the specific product instructions and take into account the safety recommendations when using it recommended by BassMotor.
- FAQ -
Do I add the shampoo before the water or vice versa?
You can add the shampoo to the bucket before adding the water, or vice versa. The sequence is not crucial. However, if you add the shampoo first when the bucket is empty before adding the water, it will generate the necessary foam to start using the product.
Is it necessary to dry the body after washing the car with shampoo?
To achieve an optimal finish when washing your car with our Wash Shampoo, we recommend drying the vehicle after rinsing. This will help prevent the formation of water marks and achieve a flawless appearance on the bodywork.
Is it safe to use car wash shampoo on all types of vehicles?
Yes, our wash shampoo is formulated to be safe and effective on all types of vehicles including cars, trucks, SUVs and motorcycles.
Can I use the washing shampoo on painted and chrome surfaces?
Yes, our car wash shampoo is safe to use on painted and chrome surfaces. It is designed to gently clean away dirt and residue without damaging the paint or chrome.
Is it necessary to dilute the washing shampoo before using it?
Yes, it is recommended to dilute the washing shampoo with water according to the product instructions. This will help to obtain a proper mixture and ensure effective cleaning without leaving residue.
How much shampoo should I use per wash?
The amount of wash shampoo to use may vary depending on the size of the vehicle and the degree of soiling. In general, it is recommended to follow the product instructions and use a sufficient amount to generate adequate foam.
Can I use car wash shampoo on my vehicle if it is very dirty?
Yes, our car wash shampoo is effective in removing dirt, dust and residue from the surface of your vehicle, even if it is very dirty.
Is it advisable to use a glove when cleaning with this product?
Without a doubt, with the help of the glove, cleaning will be much more effective, which is why we have created a pack on the web where you can find this product with the glove accessory.