Skip to content

Iron Cleaner Tutorial


- HOW TO USE THE IRON CLEANER CORRECTLY? -

IMPORTANT
Before applying Iron Cleaner, make sure the rim is completely dry and at room temperature. This will ensure a safe and effective cleaning process.

APPLICATION

Spray Iron Cleaner directly onto the rim surface you wish to clean. Make sure to cover the entire affected area with an even layer of product.

Caution: It is recommended to rinse the rim if possible before spraying the product.

Once applied, allow the Iron Cleaner to sit for at least 2 minutes. During this time, the product will react with the metal residue and contaminants embedded in the rim, helping to loosen and break them down, which you can see by the appearance of a purple effect on the rim.

After letting the product sit, use a pressure washer to rinse and remove all traces of product and dirt from the rim. Make sure to rinse thoroughly, paying special attention to hard-to-reach areas.

If stubborn residue remains, you can use a soft-bristled brush or non-abrasive sponge to gently scrub the surface of the rim and remove any remaining dirt.

Finally, dry the rim with a clean, soft microfiber towel or cloth to prevent water marks from forming and to achieve a clean, shiny finish.

Remember to always follow the instructions and precautions indicated on the product packaging.

- FAQ -

Is it corrosive to rims and brake discs?

No, our Iron Cleaner product is completely safe for rims and brake discs. It does not contain corrosive acids that can damage vehicle surfaces.

Is it necessary to rub to get results?

No, Iron Cleaner is designed to provide effective cleaning without the need for intensive scrubbing. Its powerful and efficient formula acts quickly to dissolve and remove dirt and residue from wheels, without requiring excessive effort or dirty hands.

Does the purple color of the product stain the floor?

No, the purple color of Iron Cleaner will not stain any surface. However, we recommend that you rinse off any residue with water to prevent it from drying and leaving marks.

What should I do if the rims are very dirty and not all the dirt is removed?

If the wheels are very dirty and the Iron Cleaner is not able to remove all the dirt, it is recommended to repeat the process of use. You can also use a soft bristle brush to help loosen and remove stubborn residue.

Is it better for the tires to be dry or wet before using the product?

It is best to pre-wash before applying Iron Cleaner. But our product has been designed for both wet and dry situations.

Can I use the iron rim cleaner on other vehicle components such as the bodywork?

No, Ferric Wheel Cleaner is specifically formulated for use on wheels. It is not recommended for use on other parts of the vehicle, such as the body or windows.

How often should I use the iron rim cleaner?

The frequency of use will depend on the condition and amount of contaminants present on your tires. In general, it is recommended to use the ferrous rim cleaner periodically or when you notice a buildup of brake dust or other ferrous residue on the tires.

Is it safe to use ferrous rim cleaner on my rims?

Yes, our ferrous wheel cleaner is safe and specially formulated for use on rims. It will not damage or corrode the surfaces of your rims.

What is ferrous rim cleaner?

Ferric wheel cleaner is a cleaning product designed to effectively remove brake dust, dirt and metal residue from wheels. Its formula reacts with ferrous particles and dissolves them, making them easier to remove.

Can it be used on all types of rims even white or carbon fiber?

No problem, this product has been designed with the aim of caring for and cleaning all types of materials present in rims, achieving a fantastic finish while taking care of the materials.

Shipping to all Europe

From Spain

Made in Spain

100% National Product

30 Days Warranty

No worries

Do you have questions?

Write to us