Skip to content

Quick Coat Tutorial

- HOW TO USE QUICK COAT CORRECTLY? -

IMPORTANT

Make sure to use Quick Coat in a shaded area to prevent product evaporation and achieve better results.

Before applying Quick Coat, make sure the bodywork and windows are clean.

Work in parts to get an optimal result.


APPLICATION

Thoroughly wet the bodywork and windows with water.


Spray Quick Coat directly onto WET bodywork, starting with a specific area, such as the hood.


Allow the product to sit for 5 to 10 seconds, allowing a protective layer to form.


Next, rinse the product using pressurized water. Make sure to completely remove the Quick Coat from the surface until something similar to a white foam disappears.


Repeat steps 2 through 4 on other parts of the vehicle's exterior, working in sections.


After applying Quick Coat to the entire exterior, it is important to dry the bodywork using a drying towel or microfibre cloth. This will help to remove any excess water and prevent the appearance of stains.


Remember to follow the specific product instructions and take the necessary precautions to obtain the best results.

- FAQ -

Is it necessary to wet the bodywork before applying the product?

Yes, for effective application, it is recommended to thoroughly wet the bodywork before spraying Quick Coat. This allows for even distribution of the product and better results.

Should I clean the surface before using Quick Coat?

It is recommended to have a clean surface before applying Quick Coat for best results. Removing previous dirt and residue will help the product adhere properly and provide a long-lasting protective layer.

Do I need to use a cloth to seal the product?

No, Quick Coat does not require additional sealing with a cloth. Simply spray the product onto the wet bodywork and rinse with pressurized water to achieve the desired effect.

How long does the effect of Quick Coat last?

The Quick Coat effect can last approximately 3 months on the bodywork. However, the duration may vary depending on environmental conditions and vehicle use.

Is the product safe to use?

Yes, our products have been specifically formulated and subjected to rigorous quality controls to ensure safe use in the care and cleaning of your vehicle. They have been tested on numerous vehicles for years to develop the perfect formula and provide effective results without compromising safety.

Can I use water and dust repellent on car windows?

Yes, our water and dust repellent is safe and effective for use on car windows. You can apply it to windshields, windows and mirrors to improve visibility while driving and make glass cleaning easier.

Is it safe to use the product on all surfaces of the car?

Our water and dust repellent has been specifically designed for use on exterior surfaces of the car, such as the bodywork and windows. However, it is recommended to avoid applying it on surfaces such as seats, steering wheel or pedals, as it may affect adhesion and grip.

Does the water and dust repellent leave residue or stains on the body?

No, our water and dust repellent has been formulated to leave no residue or stains on the car body. Once applied and dried correctly, you will not notice any visible marks or residue, keeping your vehicle looking impeccable.

Shipping to all Europe

From Spain

Made in Spain

100% National Product

30 Days Warranty

No worries

Do you have questions?

Write to us